Locations

Locations

Our Locations

Thailand

Castool 180 Chonburi

Canada

Castool Uxbridge

Castool Heat Treat Newmarket

Morocco

Castool 90 Kenitra

Mexico

Castool 25 Queretaro

Map
Castool 180 Chonburi
Castool 180 Chonburi
Castool Uxbridge
Castool Uxbridge
Castool Heat Treat Newmarket
Castool Heat Treat Newmarket
Castool 90 Kenitra
Castool 90 Kenitra
Castool 25 Queretaro
Castool 25 Queretaro
A areal view of the Uxbridge Canada building, with cars in the parking lot surrounded by green grass and trees.
CasTool Tooling system logo

Uxbridge Canada

Castool started their business in 1986, as Castool Precision Turning and Honing. We specialised in turning and honing hardened material. We also machined bearing housings for a few of the bearing manufacturers. As the business grew we branched out into other hardened cylindrical tooling such as extrusion stems, containers and shot sleeves. Castool changed their name to Castool Precision Tooling. As our product lines evolved, we changed the name again to Castool Tooling Systems. Castool started shipping to extruders and die casters in most countries in the world from the Uxbridge location. In the early 2000’s, more than 90% of our products were exported from Canada.

The plant today is approximately 85,000 sq ft and has 20 Tons lifting and machining capabilities.

CasTool 180 logo

180 Chonburi Thailand

Castool had many customers in Japan, Korea, India and Australia. To better service these customers and grow our business we decided to build a plant in Chonburi, Thailand in 2013. The plant today ships extrusion and die cast tooling to most countries in Asia.

The plant is approximately 45,000 sq ft and has 25 M Tons lifting and machining capabilities.

A areal view of a large building with a blue office area at the 180 Chonburi Thailand location.
The front of the 90 Kenitra Morocco location building. Grey building with the second floor blue. Three flags hang in front of the building.
CasTool 90 logo

90 Kenitra Morocco

To better serve our customers in Europe, Middle East and Africa, we decided to build a plant in Kenitra, Morocco in 2022. The plant is approximately 35,000 sq ft and has 35 M Tons lifting and machining capabilities.

CasTool 25 logo

25 Queretaro Mexico

To better serve our Latin American customers in Mexico, Central America, and South America we built an approximately 35,000 sq ft plant in Queretaro, Mexico in 2023 with 35 M Ton lifting and machining capabilities. The plant will be in full operation by June 2023.
A large white building with red, yellow and green border around the top. Small green trees and green grass in front of the 25 Queretaro Mexico location.
On lookers watch a man standing inside a large oven at the Heat Treat NewMarket Canada location.
CasTool heat Treat logo.

Heat Treat Newmarket Canada

Heat Treat Newmarket Canada

Castool Uxbridge uses approximately 4,000,000 lbs of tool steel per year. All this material is heat treated and nearly half is nitride prior to use. At the same time, our customers’ size of equipment and tooling is growing, and quality/longevity expectations are increasing. We decided in 2023 to install our own heat treatment and nitride equipment.

Our factory is approximately 6,000 sq ft and has 3 IPSEN vacuum heat treat ovens, 1 NITREX vacuum nitride oven and 4 temper ovens. The maximum size we can heat treat is 20,000 lbs or 60” dia X 90”. The maximum size we can nitride is 13,200 lbs or 61” dia X 98.5”.

Dedicated to supporting our valued customers.

Contact one of our Sales Reps or check out our factories around the world.